Service guide
March 2001
8
2. Wear and Spare Part replacement
procedures
2.1 General
Replacement procedures require
that the SpinJet is mounted on a
printer or supported similarly. In
general replacements require
covers to be removed first.
Further for general reference,
Guide 2 and Guide 5 are identified
in picture below.
In order to maintain internal
accuracy of the unit, the screws
of Beam 1 and Guide 1 should
never be loosened.
Recommended tools:
§
Torx screwdrivers T10, T15
and T20
§
T25 (provided with HP
Printer)
§
Straight blade screwdrivers
(small sizes)
§
Thin blade knife
§
Pair of pliers (pointed)
§
Soft head hammer
§
M5 screw, length 12 mm
min. (provided with the
SpinJet)
§
PIC extractor
§
Antistatic wristband
Guide 1
Beam 1
Cover 1
Cover 3
Cover 2
Guide 5
Guide 2
