Service guide
March 2001
4
Error
code
Occurs when
Possible causes
Error02
Gate sensor not on
in time
Motor 2 defective
Motor 2 harness #5 defective
Belt defective
Sensor defective
Sensor harness #6 defective
Harness #4 or #11 defective
Error03
Gate sensor not off
in time
Sensor defective
Sensor harness defective
Harness #4 or #11 defective
Error04
Boom sensor not on
in time
Motor 3 defective
Motor 3 harness #5 defective
Belt defective
Sensor defective
Sensor harness #6 defective
Harness #4 or #11 defective
Error05
Boom sensor not
off in time
Motor 3 defective
Motor 3 harness #5 defective
Belt defective
One way clutch defective
Sensor defective
Sensor harness #6 defective
Harness #4 or #11 defective
Error06
Paper feed encoder
does not reach
preset count value
in time
Sensor (right or left) defective
Sensor harness #10 defective
Harness #4 or #11 defective
Motor 1 defective
Belt defective
Other trouble shooting
Symptoms
Possible causes
Remedies
No light in control
box switch
Melted main fuse
Replace fuse at inlet
module
Harness #11 defective
Replace
None of the LEDs
are lit in the SpinJet
keypad
and
Light in control box
switch
Control box component
failure
Replace control box
SpinJet does not
respond to the signal
from the printer to
go into double mode
Harness #12 defective
Replace
