Technoton DUT-E 232 Скачать руководство пользователя страница 22

Страница: 22 / 116

General information and technical specifications of DUT-E / Technical specifications /

DUT-E and tracking devices compatibility

DUT-E fuel level sensors. Operation manual. Version 8.1

Technoton, 2020

1.4.6 DUT-E and Tracking devices compatibility

DUT-E

sensors may be used together with

Telematics terminals

or other tracking devices

whose input specifications correspond to parameters of DUT-E output signals, in accordance
with 1.4.2

—

1.4.5.

Technoton

regularly conducts compatibility and mutual accuracy tests of all manufactured

products with Terminals of different models.

table

containing the up-to-date list of Declarations of compatibility of Telematics terminals

from different manufacturers with products manufactured by Technoton is provided at:

https://www.jv-technoton.com/

Recommendations on the equipment connection and configuration can be received at the
Technoton

technical support

service.

Содержание DUT-E 232





















































































































Результаты поиска

Содержание DUT-E 232

Отзывы:

Technoton DUT-E 232, Руководство по эксплуатации, Страница: 22 / 116

Результаты поиска

Содержание DUT-E 232

Отзывы: