Technogym WAVE EXCITE+, Руководство по техническому обслуживанию

Страница: 55 / 198

Cardio WAVE : Service & maintenance manual - rev. 4.1
Pagina 5.1
5. INSTALLATION INSTRUCTIONS
5.1. SPECIFICATIONS AND REQUIREMENTS
For correct machine installation, make sure that:
1. The machine is installed on a level surface that is free of vibrations and has sufficient carrying
capacity for the combined weight of the machine and user.
2. The place of installation is free of dust and sand.
3. The place of installation meets the operating temperature and humidity conditions specified in
paragraph: 2.6. “Ambient specifications”.
4. The machine is not positioned close to sources of heat, sources of electromagnetic noise
(television sets, electrical motors, antennas, high voltage lines, household appliances, etc...) or
medical equipment.
5. To eliminate any interference with the cardio receiver, no transmitters should be placed less than
90cm from the display.
Only for powered models:
4. The mains voltage must match the value specified on the machine rating plate.
5. The electrical system must be correctly earthed.
6. The wall outlet used should be reserved for the machine and have a rating of at least 100VA.
1. The maximum number of machines connected in cascade should be that indicated in paragraph:
3.9. “Power entry module”.
7. Position the mains lead of the machine where it will not be underfoot.
2. For the installation of machines equipped with VISIO, refer to the relevant chapter of the
manual specific.