Technogym ISOCONTROL, Руководство по техническому обслуживанию

Страница: 64 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 9.4
TORSO
GLUTE 12 12 12
SHOULDER
PRESS
12 12 12
LAT
MACHINE
16 16 16
TOTAL
ABDOMINAL
12 / /
LEG CURL
12 12 12
UPPER BACK
12 / /
LEG
EXTENSION
12 12 12
VERTICAL
TRACTION
12 12 12
LEG PRESS 12 12 12
Use the “+” and “-” keys to bring up the desired value on the display. After reaching the desired
value, wait 5 seconds for the system to automatically advance to the next function.
To save the changes made see paragraph 9.1.9. “Saving the configuration”, to exit without saving
any changes disconnect the power supply form the machine.
9.1.5. T
IME
-
OUT DI ATTESA DEL CAMBIO LATO
This function is used for change side for these machines:
•
Glute Element
•
Glute Selection
•
Multi Hip Selection
•
Rotary Torso Selection
On the display, the TIMEOUT CHANGE SIDE message is followed by:
TC:0
Enter the maximum time, in seconds, than the machine waits, for change the exercise side by
customer, before the machine reverts to stand-by mode. The value should be between 0 and 60.
Recommended values for the individual machines are as follows:
MACHINE
Selection Element
MACHINE
Selection Element
ABDOMINA
L CRUNCH
0 0 0
LOW ROW
0 0 0
ABDUCTOR 0 0 0
LOWER
BACK
0 0 0
ADDUCTOR
0 0 0
MULTI HIP
20 / /
ARM CURL
0 0 0
PECTORAL
0 0 0
ARM
EXTENSION
0 0 0
PULL DOWN
0 / /
CHEST
INCLINE
0 / /
PULLEY
0 / /
CHEST
PRESS
0 0 0
ROTARY
CALF
0 / /
DELTS 0 / /
ROTARY
TORSO
20 / /
GLUTE 20 20 20
SHOULDER
PRESS
0 0 0
LAT
MACHINE
0 0 0
TOTAL
ABDOMINAL
0 / /
LEG CURL
0 0 0
UPPER BACK
0 / /
LEG
EXTENSION
0 0 0
VERTICAL
TRACTION
0 0 0
LEG PRESS
0 0 0