Technogym ISOCONTROL, Руководство по техническому обслуживанию

Страница: 35 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 5.19
•
Using a 35-mm hole saw, drill a hole
centered on the two abovementioned points,
in order to obtain a "figure eight" inside the
contours of the encoder plate drawn
previously
.
•
Use a file to remove any burrs from the
machine frame.
ONLY ON LAT MACHINE
Photo 5.2-19
The Lat Machine differs from all the other
machines of the line in the method used for
fixing the encoder, which requires the following
operations:
1. Using a drill with a 10.5-mm bit, remove the
thread from the hole on the left pulley
support bracket indicated in the figure.
Photo 5.2-20
2. Drill the hole for the pulley encoder,
indicated by arrow 4 , proceeding as
described to the previous page, as for all the
other machines.