Technogym FORMA LINE BIKE FORMA DDC5 Series, Руководство по технической помощи

Страница: 110 / 122

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Page 9.12
9.2.2.2. Write to low kit
To memorize on the low kit the values of the parameters currently on display, move using the +/-
keys of the difficulty level until the display shows:
WRITE TO LOW KIT ?
press ENTER to transfer the new data to the low kit. Return to the upper level by pressing
CANCEL
for a few seconds.
9.2.2.3. Operating data
The equipment operating data as displayed is updated every 10 minutes. This means that every time
the equipment is switched off, the data which has been modified since the last saving to memory is
lost.
Display Message Description
Life Brake:
Minutes x 10 of Brake operation
(measured by the Low Kit)
Life Kit High:
Minutes x 10 of High Kit operation
(measured by the High Kit)
Life Low Kit:
Minutes x 10 of Low Kit operation
(measured by the Low Kit)
KJ:
total KJ spent
(relating to all the exercises performed)
(measured by the High Kit)
Tot Km:
total Km travelled
(relating to all the exercises performed)
(measured by the Low Kit)
By selecting one of the items in the table above, it is possible to modify its content, but only by
resetting its value. When you press ENTER the “Reset life…” message appears with the name of
the selected item. If you press
ENTER
again, the value of the selected piece of information is reset,
whereas if you press CANCEL you return to the previous value for the information.