Technogym FORMA LINE BIKE FORMA DDC5 Series, Руководство по технической помощи

Страница: 114 / 122

Forma Line BIKE FORMA (DDC5): Technical Assistance manual - rev. 1.1
Page 9.16
9.2.5.1. Low kit version
This function allows you to display the version of the Firmware (FW) of the Brake Board. In order
to access this menu, when the display shows:
LOW KIT VERSION
press ENTER and the SW numerical sequence will be displayed:
X.Y.Z
Where:
• X = KERNEL
• Y = Brake Board
• Z = Brake Table
Which identifies the version of the Firmware (FW) .
9.2.5.2. Config. registers
This function allows to set on register at the time.
NOT used on FORLA LINE.
9.2.5.3. Low Kit fault code
This function allows you to display any fault code which is blocking the low kit. In order to access
this menu, when the display shows:
LOW KIT FAULT CODE
if you press
ENTER
, the following message will be displayed:
FAULT=XX
If FAULT=00 is displayed, the Board is not at fault.
9.2.6. H
IGH KIT VERSION
This function allows you to display the version of the display SW. In order to display it, when the
display shows:
HIGH KIT VERSION
press ENTER and a message will be displayed which identifies the version of the SW.