Technisonic Industries Limited TiL-91-DE/S, Инструкция по установке и эксплуатации

Страница: 37 / 39

3-14
3.4.8 Toggling Between Two Channels
+), +),
Press
*
R
* *
E
*
to recall previous channel.
.)- .)-
Example:
Recall Channel 0 as described in para 3.4.3
117.975 will be displayed.
Recall Channel 2
138.000 will be displayed.
+), +),
Press
*
R
* *
E
*
.)- .)-
117.975 will be displayed.
+), +),
Press
*
R
* *
E
*
.)- .)-
138.000 will be displayed.
3.4.9 Search Mode
In SEARCH MODE the receiver steps through each stored channel until a transmitted signal is
found. The receiver will lock on to the first signal strong enough to quiet the squelch circuit.
SEARCH mode is exited when a signal is found. Normal operation resumes as if the SEARCH
frequency was selected from the keypad or recalled from memory.
+), +),
Press
*
E
* *
4
*
to enter SEARCH mode.
.)- .)-
+),
Press
*
E
*
to exit SEARCH mode.
.)-
3.4.10 Scan Mode
In SCAN MODE the receiver steps through each stored channel until a transmitted signal is
found. The receiver will lock on to the first signal strong enough to quiet the squelch circuit.
When a signal is found, the frequency is displayed and the audio is enabled for 5 seconds.
After the five second lock SCAN is resumed until the next frequency is found and the process
is repeated. SCAN mode is continuous until the operator exits or the unit is switched off.