82
List of permitted actions
Automatic changeover
Normally, the controller automatically switches back to
user mode
30 minutes
after login
as an ex
-
pert or technician.
For programming or test purposes, this automatic changeover can be switched off. To do so, an ex
-
pert selects "Change expert password", first enters the old password, then enters
nothing
(not "0" ei
-
ther) and confirms this with the tick.
The same can be done for the Technician password.
When new programming is loaded, the controller returns to the User level and the Expert password
set by the programmer will apply.
User level
Displays and permitted actions
User
•
Function overview
with options for control
•
Access to main menu
only if enabled for
"User"
in the "General settings"
• Summary of values
•
Inputs:
display only, no access to the parameters
•
Fixed values:
changes to the value or status of the fixed values enabled for
User, no access to the parameters
•
Functions:
display of the function status, no access to the parameters
•
Messages:
display of active messages, hiding and deleting messages
•
CAN and DL bus:
no access to the parameters
•
General settings:
language, brightness and display timeout can be altered
•
User:
change of user (with password entry)
•
System values:
setting the date, time, location data, display of System values
Technician
All of the above plus:
•
Access to main menu
only if enabled for
Technician
or
User
in the "General set
-
tings"
• Changes to the parameters for
inputs
(except for type and measured variable),
no creation of new ones
• Changes to the parameters for
outputs
(except for type; status only if enabled
for User or Technician), no creation of new ones
• Changes to the parameters for
fixed values
(except for type and measured vari
-
able; value and status only if enabled for User or Technician), no creation of new
ones
•
General settings:
Changes to
user defined designations
and creation of new
ones, selecting the currency
•
Functions:
changes to user defined input variables and parameters; output vari
-
ables are visible
• All settings in the
CAN
and
DL
bus menus
•
Data administration
actions
Expert
All
actions and
all
displays are accessible.
Содержание CAN-EZ3
