>
Confirm
yes
by pressing the
OK
key.
>
Read the note displayed on screen, and confirm with the
OK
key.
>
Press the
Menu
key to return to normal operation.
In order to load the updated software overnight, the receiver must be left
in the Standby mode. The progress of the download will be indicated by
"SatL" on the display. This download should NOT be interrupted by swit-
ching the receiver on or off while it is in progress.
When the software has been fully loaded, the function Download enabled will be automatical-
ly reset to
no
.
Should the parameters of the data channel for the download of software updates be chan-
ged, you can correct them in this menu as described under points 7.7.3 and 7.7.4 (search for
transponders and programmes). Current transponder information can be obtained from your
retailer, or from our homepage in the Internet. Under normal circumstances you should not
change the settings in this menu.
7.8.4 EPG Channel
Your receiver provides the facility of receiving a dedicated data channel with expanded EPG
information via the ASTRA satellite system at 19° East. This enables you to preview pro-
grammes for up to a week in advance. If you do not wish to receive this additional data, or if
it is not available at your location, data reception may be disabled as follows:
>
Press the
OK
key to display the sub-menu
EPG.
>
Choose the setting
Download enabled yes
in order to receive the data channel,
or
Download enabled no
in order to disable reception.
The EPG information provided by broadcasters/channels is only now available.
Should the parameters of the data channel used for loading the EPG list have changed, they
can be corrected in this menu as described under points 7.7.3 and 7.7.4 (search for trans-
ponders and programmes). Current transponder information can be obtained from your retai-
ler, or from our homepage in the Internet. Under normal circumstances you should not chan-
ge the settings in this menu.
7.9 System Configuration
This menu entry allows you to view all specific data relating to the receiver.
>
Use the
up/down arrow
keys to mark this entry in the sub-menu
Settings
.
>
Confirm with the
OK
key.
>
Use the
Back
or
Menu
keys to exit this function.
7.10 embedded Cryptoworks
Use this menu entry to access the sub-menus related to the smart card being used.
38
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 38
All manuals and user guides at all-guides.com