>
Press the
Back
key to return to the
Next
table.
6.13.7 EPG - Functions
In order to utilise the following EPG functions, you must first select the
EPG
as described in
Point 6.13.3.
6.13.7.1 EPG Information
The EPG Info will allow you to view a brief piece of information on the programme or broad-
cast selected/marked, provided this information is available.
>
Use the
arrow
keys to indicate the programme selected.
>
Press the
EPG
key to display the information
More extensive text can be moved, by using the
up/down arrow
keys, or scrolled,
by using the
left/right arrow
keys.
>
Press the
Back
key to return to the previous table.
Or
6.13.7.2 Preselect Programmes
>
Mark the desired programme by using the
arrow
keys.
>
Pressing the
OK
key will automatically preselect the programme, and it can be vie-
wed as soon as the programme begins broadcasting.
>
Press the
Back
key to return to the previous table.
6.13.7.3 Activate VCR (Timer mode)
The
Activate VCR
function allows you to switch your receiver on or off for a selected pro-
gramme, e.g. in order to record this in your absence. Please note that you must also pro-
gramme your VCR in order to record the programme.
>
Use the
arrow
keys to mark the selected programme.
>
Press the
red
function key.
The selected entry will now be displayed in red.
Your receiver will be switched on at the time when the selected programme is due to
begin. If the receiver is switched on by the timer, the letter "
t
" will be shown on the
display, together with the channel number. In this mode, most of the functions of the
remote control are disabled in order to prevent an accidental premature interruption of
the recording. If the receiver is in standby mode, the activated timer will be indicated
by blinking of the two dots (colon) in the time display.
>
Press the Back key to return to the previous display.
D
Diissaabblliinngg
tthhee
ttiim
meerr
ffuunnccttiioonn
If you want to cancel a timer command entered via the EPG, repeat the above steps, then
cancel the timer setting by pressing the
red function
key.
In order to interrupt/disable while the timer is actively in operation, switch off the receiver by
means of the
on/standby
key. When you press this key again, the receiver will be switched
on, and you can continue with normal operation.
6.13.7.4 EPG Survey
You can use the EPG Survey in order to display the current day's programme of a single
channel. This can be done as follows:
>
Press the
EPG
key.
The EPG table "
Now
" will be displayed.
Press the
green
function key.
The table
EPG Survey
will be displayed.
24
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 24
All manuals and user guides at all-guides.com
