3. Transponder:
Choose this option to scan a specific transponder of a specific satellite. You can search for
all or selected programmes of a particular transponder.
4. Program:
This option is intended specifically for cases where the desired channel could not be found
by any of the other options. Please note that to utilise this search method, you will have to
enter the specific Service ID Number of the channel, which you can obtain from the broadca-
ster, or from the Internet.
Once the search has been completed, the number of channels identified by your receiver will
be displayed on your screen, also stating how many of these are new channels. New chan-
nels are shown in red type in the Total List, and can be transferred to the User List in accor-
dance with
Point 7
(Changing the Basic Programming).
>
In order to search for programmes, press the
Menu
key to display the
Main Menu
.
>
Use the
up/down arrow
keys to mark the entry
Search
.
>
Confirm with the
OK
key.
The sub-menu
>Search
will be displayed.
>
Use the
arrow
keys to select the search mode to be used.
>
Press the
OK
key to display the relevant sub-menu.
7.7.1 All
When this search mode is activated, all satellites and transponders available in the system
will be scanned. At the end, new programmes will be displayed in red type in the program-
me/channel list.
>
Use the
up/down arrow
keys to select the
All
option.
>
Confirm with the
OK
key.
The legend "
Start search
" will appear on the display.
>
Press
OK
again to start the search
34
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 34
All manuals and user guides at all-guides.com
