IMPORTANT NOTICE !!!
Ensure that the receiver has received and stored the basic time. This is shown on the dis-
play during Standby mode. If this is not the case, you should select a channel with an auto-
matic time signal, such as ZDF in Germany, and switch this on for approximately 30
seconds, so that your receiver can automatically acquire the current time data.
After this procedure, the current time should be displayed in Standby mode.
7 Changing the Basic Programming
If for some reason you are not satisfied with the preprogrammed settings of your receiver,
you can alter the list of channels according to your own preferences. This function is also
required in order to sort the programmes identified in a Search run.
You should note the following:
Your receiver features two programme/channel lists, the User List and the Total List.
The User List includes those channels you can select by means of the numeric key pad, and
by using the channel up/down keys.
The Total List includes all channels.
If you do a search in this list, new programmes will be shown in red, and can be transferred
from the Total List to the User List.
7.1 Adding/Deleting Channels
To add new channels to the user list, or to delete channels, proceed as follows:
>
Press the
Menu
key to display the
Main Menu
.
>
Use the
up/down arrow
keys to mark
TV Programs
if you wish to add TV chan-
nels, or Radio Programmes, if you wish to add radio stations.
>
Confirm with the
OK
key.
The sub-menu
>TV-Programmes
will be displayed.
>
Use the
up/down arrow
keys to mark the entry
Select
.
29
bed_anl_DigiBox_Cryptoworks_englisch.qxd 04.07.01 14:20 Seite 29
All manuals and user guides at all-guides.com
