14
BOYLER CONNECTION KIT (ONLY FOR 245C-235H MODELS)
The unit is predisposed to replace a radiator in an already existing heating system. it is necessary to buy the boyler
connection kit that can be installed on both side of the unit according of the position of the water connections.
CARE AND CLEANING
WARNING! For safety’s sake, be sure to turn the air conditioner
OFF and also disconnect it from the power supply before cleaning
it.
1. Cleaning of the Air Filter
The air filter must be checked at least once every two weeks
operation. Operation with a dirty filter always causes a lower
efficiency of the air conditioner and severe product damage.
The filter is located at the back of the front intake grille: open
the grille pulling downward the two hooks, grasp the air filter and
pull upwards. Use a vacuum cleaner to remove light dust. If
there is sticky dust on the filter, wash it with lukewarm soapy
water, then rinse in clean, cold water and dry it before
reinstallation.
2. Cleaning of Casing and Grilles.
To clean the air conditioner, wipe it with a clean soft cloth, lightly
moisted. In case it is stained, moisten the cloth with soapy
water. Never use solvents or harsh chemicals, nor very hot
water. Do not pour water over the air conditioner to clean it:
this will damage the internal components and cause an electric
shock hazard.
3. After use.
If you are not going to make use of the air conditioner for a
long period, clean the air filter and verify that there is no
condensate water inside the bottom of the unit (see paragraph
“HOW TO DISCHARGE THE CONDENSATE WATER”). Do
not put heavy objects on top of the unit.
4. Transport.
Keep the air conditioner in the vertical position during
transportation.
5. For your safety care check periodically the conditions of
the electric supply cable; the electrical connection of the
unit is Y type with cable prepared in a special way; in case
you should notice any damage due to usage, call the
nearest After Sale Service to get the cable replaced.
EG
Air filter
Intake grille
