Techne TC-3000G, Руководство оператора

Страница: 44 / 51

43
Controller reset
The 'Controller reset' will delete all saved
programs from the unit.
Highlight 'Controller reset' then press
"Enter"
To delete all the programs, press "Enter"
RUNNING THE TC-412 FROM A PC
The TC-412 can be run from a PC using Techne’s Gensoft software. This is available to download from
the Techne web-site at www.techne.com. You will need 'Winzip' (which is available free of charge on
www.winzip.com) to unzip the files. Instructions for using Gensoft are included in a separate manual.
CONNECTING ONE UNIT TO THE COMPUTER USING AN RS232 CABLE
If you are driving one TC-412 unit you will need part number FGEN232 which includes a cable, Gensoft
on disk and an instruction sheet.
Program defaults
Settings
Passwords
Controller reset
CONTROLLER RESET
This will delete
all programs
[ SURE ? ]
[ Yes or No ]
TC412 Techne Manual 19/12/08 3:38 PM Page 45