CONFIGURATION
Password pad
[ to accept
]
40
Program Information
INFORMATION
CONFIGURATION
Warning!
The Configuration software should only be accessed by designated personnel, as some
parameters can be changed or may be lost when using it.
Pressing "Enter" while a program is
running will give information about the
current run including which program is
actually running and the unit status e.g.
holding or ramping.
An example is shown here.
The
Information
field on the front screen
contains all the unit-specific information such
as serial number and software version.
Press "Enter" to access the unit
information.
The complete list is displayed here.
Note that the "Comms address" must be
unique for each unit if more than one cycler is
linked to a PC using the Gensoft control
software.
The
Configuration
field on the front screen
allows a system administrator access to set up
all the default settings for the programs, time
and date settings and to change and remove
passwords.
Access to the 'Configuration' set up is
password protected.
To enter configuration, use the alpha keys to
type in 'pad'
Press "Enter"
Programs
[0]
Information
Configuration
[ , to select ]
Block
96x0.2ml
Block s/n
139160-2
Unit s/n
131625-1
S/w version
33.01
H/w version
1
Comms address
1
Unit cycles
624
Block cycles
69
DONNA
Heated Lid
on
Status
ramping
[ to exit
]
Programs
[0]
Information
Configuration
[ , to select ]
[ to exit
]
TC412 Techne Manual 19/12/08 3:38 PM Page 42
Содержание TC-3000G
Страница 1: ...TC 412 OPERATOR S MANUAL Issue 3 9 08...
