Techne TC-3000G, Руководство оператора

Страница: 39 / 51

TO RUN A PROGRAM
38
When the unit is switched on the display will
show this screen.
If known, type in the 'Speed dial' number for
the required program and press "Enter"
This will take you directly to the required
program.
If you do not know the 'Speed dial' number,
press "Enter" to access the list of stored
programs.
Next either:
1. Scroll down to the required program using
the "Up Arrow" and "Down Arrow"
keys.
2. Or type the first letter of the program name
in the "New program" field; this will then
list all the program names beginning with
that letter. Use the "Up Arrow" and
"Down Arrow" keys to select the
required program.
Press "Enter" to accept For example
'Donna'.
To run the program, select 'Run program' and
press "Enter"
A screen similar to this one will appear.
Press "Enter" to start the run.
Programs [0]
Information
Configuration
[ , to select ]
Programs [7]
Information
Configuration
[ , to select ]
* * New Program * * [ ]
2 STEP TEMPLATE 501
3 STEP TEMPLATE 502
[ , to select ]
DAVID 8 [D]
DONNA 7
[ , to select ]
DONNA [7]
Run Program
View Program
[ , to select ]
DONNA
[ RUN PROGRAM? ]
[ Yes or No ]
TC412 Techne Manual 19/12/08 3:38 PM Page 40