6
2.
UNPACKING AND INSPECTION
Carefully unpack the valve and examine the items contained in the carton.
These will include:
Inspect the unit for any damaged which may have occurred in transit. If
such damage has occurred, notify the carrier at once. Claim for damage
must be made by the consignee to the carrier and should be reported to the
manufacturer.
1)
Jet Valve TS9800 (version shown below is without heater)
2)
Jet Valve Controller TS980
3)
Nozzle Insert (order separately)
4)
Actuator Cable (3-to-2 pin connectors)
5)
Sensor Cable (6-to-5 pin connectors)
6)
Heater Cable (4-pin connectors). This cable is available only if
the jet valve with heating system was ordered
7)
Heat Guard with M6 mounting screw. These items are available
only if the jet valve with heating system was ordered
8)
Syringe Bracket with M4 mounting screw
9)
Nozzle installation tool
10)
Nozzle adjustment tool
11)
Tappet changing tool
12)
Tappet seal tool
13)
Wi-Fi antenna (Not available currently)
14)
Power Supply
15)
User Guide
Figure 1: TS9800 Jet Valve System
