12
4.3 Nozzle Calibration
The nozzle calibration process is to make sure that the nozzle insert is
placed at the correct position with respect to the tappet. Follow the
instructions below before starting the actual dispense procedure.
Step 1:
Touch the ‘Login’ icon to enter the login screen
Step 2:
Enter the default password ‘0000” in the password window. Then touch
‘Accept’ icon to save and exit
.
Attention
: For changing the password,
refer to section 9.5.1.
Step 10:
•
Turn on the controller by
pressing the On/Off switch.
Perform the calibration process;
this process is to make sure the
nozzle insert is placed at the correct
position with respect to the tappet.
(see
next
section
4.3
for
instructions).
