39
15.
Touch the ‘Accept’ icon to exit
16.
Touch the ‘Pulse’ icon to enter the setup screen
17.
Touch the up and down arrows to set the desired number
strokes per dispensing cycle.
18.
Touch the ‘Accept’ icon to save and exit
19.
Enter all desired dispensing parameters, then touch ‘Save’ icon
Note:
The system will automatically calculate and display the operating
frequency
based on the entered dispensing parameters.
9.5.6
Calling up Dispensing Parameters
The controller has 50 memory cells store all dispensing parameters.
1.
Touch the forward or backward arrow to select
the desired memory cell or touch the value to type in a specific
location.
2.
Touch the ‘Accept’ icon to exit
9.5.7
Reset Cycle Counter
The cycle counter records the number of dispense cycle being activated.
Up to 999,999,999 cycles can be recorded for each of the program saved
in memory. To reset the counter for the current program, follow the
steps below:
