TECDrive TEC-3 User Guide Revision 1.20
www.tecmotors.co.uk/tecdrive
7
1
Q
u
ick
Sta
rt
Up
1.4.
Quick Start Overview
Quick Start
–
IP20 & IP66 Non Switched
•
Connect a Start / Stop switch between control terminals 1 & 2
o
Close the Switch to Start
o
Open to Stop
•
Connect a potentiometer (5k
–
10k
Ω
) between terminals 5, 6 and 7 as shown
o
Adjust the potentiometer to vary the speed from P-02 (0Hz default) to P-01 (50 / 60 Hz
default)
Quick Start
–
IP66 Switched
Switch the mains power on to the unit using the built in isolator switch on the front panel.
The OFF/REV/FWD will enable the
output and control the direction of
rotation of the motor.
The potentiometer will control the motor shaft rotational speed.
