6. SYSTEM MODE
EO18-33011
6.7 TEST PRINT
6-42
6.7.8 Factory Test
While selecting the Factory test, press the [PAUSE] key to start printing the factory test pattern.
After printing is completed, the display returns to “<4>TEST PRINT”.
Pressing the [PAUSE] key causes the display to shown “FACTORY TEST” again. Then, press
the [FEED] key.
!
Print Sample of Factory Test
NOTES:
1. Factory test print conditions:
One paper feed, Slant lines (3 dots), Bar codes, Characters, Item count: 5 pcs.
each, Print speed: 5”/sec., Sensor type: Black mark or Feed gap sensor, Ribbon
type: Transmissive ribbon
2. When the feed gap sensor is selected, a gap length is 3 mm.
Print method: Thermal transfer, Issue mode: Batch printing, Label length: 76 mm,
Print tone fine adjustment.
6.7.9 Auto Print
While selecting the Auto Print, press the [PAUSE] key to feed one media and print slant lines (3
dots) on 5 pieces of media.
Next, press the [PAUSE] key to print bar codes on 5 pieces of media. Pressing the [PAUSE]
key again causes the printer to print characters on 5 pieces of media.
NOTE:
Select “AUTO PRINT (TRAN)” when using labels, and “AUTO PRINT (REFL)” when
using tag paper.
AUTO PRINT(TRAN)
AUTO PRINT(REFL)
Feed Gap Sensor
Black Mark Sensor
FACTORY TEST
