6. SYSTEM MODE
EO18-33011
6.5 PARAMETER SETTING
6-22
=
6.5.12 EURO Code Selection
With this parameter you can select Euro Font code (C). When “<2>PARAMETER SET” appears,
press the [PAUSE] key 12 times.
NOTE:
Pressing the [FEED] or [RESTART] key causes 1 byte change in the Euro Code
value.
After selecting the Euro font code, press the [PAUSE] key.
6.5.13 Auto Print Head Check Selection
With this parameter you can select whether or not the Auto Print Head Check function is
activated at the power on time. When “<2>PARAMETER SET” appears, press the [PAUSE] key
13 times.
NOTE:
It is recommended that this function is turned on when high quality printing such as bar
codes printing is required, otherwise turned off.
After selecting the auto print head check, press the [PAUSE] key.
[RESTART]
[FEED]
(852 &2'(
%
(852 &2'(
))
(852 &2'(
)(
(852 &2'(
(852 &2'(
$872 +' &+. 2))
$872 +' &+. 21
$872 +' &+. 2))
[RESTART]
[FEED]
Auto print head broken element check is not
performed.
Auto print head broken element check is
performed.
