Teac WX-7000 Скачать руководство пользователя | Manualshive

Страница: 8 / 88

background image

8

1. Introduction

1-6. Recording media

Open the drive cover of the WX-7000 unit to access the RDX docking
station and SDHC card slot.

1-6-1. RDX cartridge

One internal RDX 3.5-inch drive (HDD or SSD)

Recording capacity

HDD: 500 GB – 1.5 TB
SSD: 64 GB – 512 GB

1-6-2. SDHC card

One SDHC card slot

Compatible media

SDHC cards (SDXC cards not supported)

Recording capacity

4 GB – 32 GB

Recommended speed class

Class 10

1-6-3. Media verified for use

This unit uses RDX cartridges and SDHC cards for recording and
playback.
We provide a list of RDX cartridges and SDHC cards that we have
verified the operation of with this unit on our Industrial Products
Division data recorders website.

http://datarecorder.jp/

You can also contact the sales office of our Industrial Products
Division.

1-7. TAFFmat format

1-7-1. Type of files

The WX-7000 makes a binary-format data file and ASCII-format
header file each time recording stops or pauses.
Data file: Contains data converted from analog to digital (binary for-

mat with a “dat” file extension)

Header file: Contains recording conditions and other information

(text format with an “hdr” file extension)

o

In addition, when voice memos are recorded, their files with “wav”
extensions are also saved.

1-7-2. File name

The file name is common to the data file and header file. An ID
number is added to the end of the specified file name. When you
specify a new file name, the ID number starts from 1. After recording
is stopped or paused, the ID number is automatically incremented
each time the recording restarts. If a data file with the same name
or same ID number already exists when recording to the media, the
next ID number is used.
To specify a file name, choose FILE and RECORDING FILE, and then
specify the file name in FILE. For the file name, use up to 5 half-width
alphanumeric characters.
The system attaches a 3-digit ID number (starting from 001) to these
5 characters to make a total of 8 characters. If the designated charac-
ter is 4 or less, the portion between the characters and the 3 digits
will be filled with “0”, and the number of characters in the file name
will become 8 in total.

«
...
6
7
8
9
10
...
»

Содержание WX-7000

























































































Отзывы:

Нет отзывов

Похожие инструкции для WX-7000

Бренд: Velleman Instruments Страницы: 12

Бренд: Microtronics Страницы: 127

Бренд: Extech Instruments Страницы: 7

Бренд: Extech Instruments Страницы: 11

Бренд: Extech Instruments Страницы: 10

Бренд: Extech Instruments Страницы: 11

Бренд: Extech Instruments Страницы: 15

Бренд: B+B Sensors Страницы: 19

Бренд: B+B Sensors Страницы: 18

Бренд: Agilent Technologies Страницы: 8

Бренд: Darfon Страницы: 35

Бренд: Lascar Страницы: 5

Бренд: ICP DAS USA Страницы: 46

Бренд: EasyLog Страницы: 2

Бренд: Fluke Страницы: 254

HOBO U30 Series

Бренд: Onset Страницы: 2

DeltaBlack 71614

Бренд: ETM Страницы: 2

Бренд: Honeywell Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды