Teac WX-7000 Скачать руководство пользователя

Страница: 46 / 88

11. AQ-VU synchronized recording

11-1. Connections

Main unit

AQ-VU

AQ-VU synchronization cable

Use an AQ-VU synchronization cable to connect the main unit’s
AQ-VU synchronized recording connector with the AQ-VU unit’s
SYNC IN connector.

Do not connect an AQ-VU synchronization cable when not using
synchronized operation.

Turn off the main unit and the AQ-VU unit before connecting or
disconnecting an AQ-VU synchronization cable.

11-2. Turning the units on

In order, turn the AQ-VU and the main unit on.

11-3. Settings

Set the AQ-VU for recording start and stop control, including the
clocks of both units.

Synchronized playback of the main unit and the AQ-VU is not
possible.

To synchronize the AQ-VU, set AQ-VU SYNCHRO to ON on the
AQ-VU SETTING screen.

The clocks of the main unit and the AQ-VU are not synchronized
automatically. Manually synchronize them on the ADJUST TIME
screen.

To synchronize operation with the main unit, connect the AQ-VU
only to the master unit. Do not connect it to a slave unit.

AQ-VU synchronization cannot be used with 204.8kHz sampling.

When not using the AQ-VU, set AQ-VU synchronization to OFF.

Always turn the AQ-VU off first when turning the units off.

If you turn the main unit off while the AQ-VU is still on, the AQ-VU
might start recording temporarily.

Make the following settings on the AQ-VU.
The unit might not work properly with settings other than the ones
below.
Recording Settings
VIDEO SIZE

FULL

PRE TRIG TIME

000sec

START MODE

EXT IN (CLK)

EXT IN LEVEL

LOW

Serial Communication
BAUD RATE

9600bps

See the operation manual included with the AQ-VU for the set-
tings of other functions.

Содержание WX-7000

























































































Результаты поиска

Содержание WX-7000

Отзывы:

Похожие инструкции для WX-7000

Бренды по названию

Популярные бренды

Teac WX-7000, Руководство пользователя

Результаты поиска

Содержание WX-7000

Отзывы:

Похожие инструкции для WX-7000

Бренды по названию

Популярные бренды