Teac WX-7000, Руководство пользователя

Страница: 29 / 88

29
6-1-2. Protection switch
protection switch
Writing not possible Writing possible
When a protection switch is set to , writing to the cartridge is
prevented.
When a protection switch is set to
, writing to the cartridge is
possible.
6-1-3. Loading and ejecting
The front of the docking station has an opening for RDX cartridge
insertion.
This opening has a protective door. To its bottom right is the EJECT
button that also functions as a power supply indicator.
Never remove an RDX cartridge when the unit is in use (includ-
ing when recording, playing back or writing data). Removing a
cartridge could cause recording to fail, recorded data to be lost
and loud noises from the monitoring output, which could damage
equipment.
Loading RDX cartridges
Insert an RDX cartridge into the docking station with the correct
orientation. Its keyed corner should be on the top left and its write-
protection switch should be at the back right.
Push the RDX cartridge in gently until it makes a clicking sound and
locks into place.
6. Basic operation
Ejecting RDX cartridges
Press the EJECT button.
After the RDX cartridge is ejected from the docking station, pull it
out directly.
If an RDX cartridge cannot be ejected
If an RDX cartridge cannot be ejected, stop the power supply to the
unit and confirm that the EJECT button indicator is unlit.
If the LCD display is unlit but the RDX docking station EJECT button
is lit green, stop the power supply to the DC-IN or the AC adaptor.
After confirming that the EJECT button indicator is unlit, restart the
power supply to the unit.
After the Home Screen appears, press the EJECT button to remove
the RDX cartridge.
o
If an RDX cartridge is reinserted while it is being ejected, for
example, the media might not be recognized. If this occurs,
restart the unit.
6-1-4. Emergency ejection of RDX cartridges
At the top center on the front panel of the docking station is an
emergency ejection hole.
If you are still unable to eject an RDX cartridge after following the
procedures in “If an RDX cartridge cannot be ejected” above, use the
following procedures.
1
Stop the power supply to the unit.
2
Straighten a large paperclip and insert one end
into the emergency ejection hole.
Push the paperclip straight in with a small amount of force to
eject the cartridge.
3
After the RDX cartridge is ejected from the
docking station, pull it directly out.
CAUTION
Do not use the emergency ejection hole to eject a cartridge
when the cartridge indicator is blinking green.