Teac WX-7000, Руководство пользователя

Страница: 58 / 88

58
13. SYSTEM menu
13-1-2. Sensor voltage
On the INPUT SETTING screen, press the F2 (Sens Volt) button to
open the sensor voltage screen.
This screen shows the connected expansion unit numbers and their
sensor voltage settings (voltages supplied to ICP sensors).
Current selection
The sensor voltage can be set individually for each AU-WXEPIO
expansion unit.
The options are 24V and 28V.
o
If SENSOR CURRENT is set to OFF for a channel, sensor voltage will
not be output to it.
Selection
Use the VALUE knob and the up, down, left and right (
5
,
b
,
g
,
t
) buttons to change the selection.
Press the VALUE knob to change the setting of the selected
parameter.
OK (F1 button)
Confirm the settings and return to the INPUT SETTING screen.
13-2. OUTPUT SETTING
In the SYSTEM menu, select OUTPUT SETTING and press the VALUE
knob to open the OUTPUT SETTING screen.
Current selection
Channels shown
Expansion unit shown
channel number
OUTPUT RANGE
o
To return to the SYSTEM menu, press the MENU or CANCEL but-
ton on the front panel.
o
If you want all channels to have the same settings, after confirm-
ing the set values, press the VALUE knob while pressing and
holding the SHIFT button.
Selection
Use the VALUE knob and the up, down, left and right (
5
,
b
,
g
,
t
) buttons to change the selection.
Press the VALUE knob to change the setting of the selected
parameter.
Channels shown
This shows the range of channels currently shown.
Expansion unit shown
This shows the number of the expansion unit that has the channels
currently shown.
OUTPUT RANGE
Set within the setting range from 1.0 V to 5.0 V in 0.1V increments.
PREV UNIT (F1 button)
Opens the OUTPUT SETTING screen of the previous expansion unit.
OutUnit Set (F2 button)
Opens the OUTPUT UNIT screen.
NEXT UNIT (F4 button)
Opens the OUTPUT SETTING screen of the next expansion unit.