47
Component video output
[GENERAL
q
Video Out
q
Comp. Video]
This setting allows the selection of interlaced (Interlace) or
progressive-scan (Progressive) video from the component
video outputs.
Progressive-scan video provides a better, clearer picture.
However, it is not supported by every television or monitor.
You should ensure that this mode is supported fully by your
display device before turning on this option.
<
When your TV isn’t compatible with progressive scan, do not
select “Progressive”. No picture will be shown on the
monitor.
If you select “Progressive” by mistake, connect your TV or
monitor via the VIDEO OUT jack to display the Setup menu
and change the setting to “Interlace”, or initialize the default
settings again (see page 7).
<
When this HDMI output is turned on, even if progressive scan
has been selected for the component video outputs, an
interlaced signal is output from the COMPONENT VIDEO
terminals.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’
PAL-NTSC conversion
[GENERAL
q
Video Out
q
PL-NT Conv.]
This allows you to playback and show NTSC discs on PAL
equipment, or playback PAL discs on NTSC equipment. There
are three options for this setting:
OFF
PAL discs can only be shown on PAL equipment, and NTSC
discs can only be shown on NTSC equipment. Use this setting
to produce the best possible picture, by playing each type of
disc on the appropriate equipment.
PAL>NTSC
PAL discs can be displayed on NTSC equipment. The bottom
part of the picture is cut off and the height will be elongated.
NTSC>PAL
NTSC discs can be played back on PAL equipment. The height
of the picture will be reduced.
Closed captioning
[GENERAL
q
Video Out
q
Caption]
The unit can play back DVD discs which include closed
captioning information and show the closed captions on
compatible televisions or monitors.
Turn this function either ON or OFF.
Still mode
[GENERAL
q
Video Out
q
Still Mode]
There are three options to enable different still modes for
DVD, depending on whether a movie or other type of video is
being played back. This setting determines the clearest still
picture that can be obtained when DVD playback is paused.
Auto
Automatically chooses between field and frame modes.
Field
Usually provides a sharp still picture. Depending on the disc,
the image might be shaky even when “Field” is selected.
Frame
Usually provides a better still picture with movie DVDs.
