115
ENGLISH
6. Setting up the Drive
It is of major importance to insert the provided driver
disk into the floppy drive before Next will be clicked be-
cause otherwise the driver will not be installed.
If the device driver is loaded from a folder at your hard
disk you have to carry out the steps 6 and 7 as shown
below.
6. When the content of the driver disk is stored in advance or it is
downloaded from the Internet, select "Specify the location of the
driver (Advanced)" and click the Next button.
7. Select "Specify a location:" and input the location of the folder where
the driver disk contents are stored. Click the Next button.
The TEAC device driver is now installed. Ensure that the drive was
recognized correctly (see section 6.3, step 7).
W a r n i n g
C a u t i o n
