displayed this key moves the cursor to the next menu selection up. Numbers and
characters can also be entered directly using a USB keyboard.
\/ Key (down cursor on a USB keyboard)
\/ (Down arrow) – If being prompted to enter a number or character this key decrements
the character at the cursor to the next lower character or number. If a menu is being
displayed this key moves the cursor to the next menu selection down. Numbers and
characters can also be entered directly using a USB keyboard.
ENTER Key (Enter or Return key on a USB
keyboard)
If being prompted to enter a number or name this key accepts the currently displayed
selection. If a menu is being displayed the
ENTER
key moves 1 level deeper into the menu
structure. If the next item is executable it starts that process.
Stop Key (use the escape key on a USB keyboard)
This key stops or aborts whatever is going on. When recording discs the System is busy
and this key may not respond immediately, so press and hold it down until prompted to
do something else.
While a menu is being displayed the
STOP
key (escape on a USB keyboard) backs up 1 level
higher in the menu structure.
8.3 LCD Display
The LCD display is used either to display menus or to show status. For instance while
copying it shows what it is doing, the number it has to do, how many it has done, and the
current mode (such as Burn or Simulate).
8.4 Menu Structure
Use the up /\ and down \/ arrow keys to position the cursor (a > character on the left
most column of the display) to the desired menu item. Then use the
ENTER
key to select
it.
Following is a description of each menu selection.
8.4.1 Copy
Use this menu option to start copying discs by reading the master to the hard disk and
then copy from the hard disk image. See the Quick Start Copying section of this chapter
for further instructions.
8.4.2 Compare
Use this menu option to start verifying copies. See the Quick Start Comparing section of
this chapter for further instructions.
8.4.3 Image Menu
This menu option is used to maintain image files kept on the hard drive.
8.4.4 Load New Master
Read a Master Disc and put the image on the hard drive without copying or verifying.
