Limited 1 Year Warranty
TEAC Europe GmbH
(hereinafter “
TEAC
”) warrants to the original end user that the AP-150 series
equipment purchased (Product) will be free from defects in material and workmanship for a period of one
year from the date of original purchase. Any part replaced under warranty is warranted to be free from
defects in material and workmanship until the expiration of the original warranty.
TEAC further warrants that the goods sold are as described, but no promise, description, affirmation of
fact, sample model or representation, oral or written shall be part of an order, unless set forth in these
terms and conditions, or are in writing and signed by an authorized representative of TEAC.
This warranty is subject to the following further conditions:
1)
This warranty is limited to the electronic and mechanical performance only, as expressly detailed
in the Product specifications and NOT to the embedded software, firmware or to third party
software.
2)
This warranty shall not apply to any Products which are stored, or utilized, in harsh environmental
or electrical conditions outside TEAC’s written specifications.
3)
This warranty shall be valid only if the Product was purchased by the End User from an authorized
TEAC Distributor/Reseller.
4)
This warranty shall not apply to any Product which has been modified, improperly repaired,
improperly installed, altered, or disassembled.
5)
This warranty shall not apply to any Product that has been subject to misuse, negligence, accident
or normal wear and tear.
6)
Heavy use may require consumable items such as Recorders and Print Engines to be serviced
within the warranty period. Examples of heavy use are:
•
More than 12,000 discs burned per recorder
•
More than 25,000 discs printed or more than 100 ink cartridges used for the FlashJet2 Print
Engine
Such service is not covered under warranty. Parts replaced in the course of a warranty service are subject
to the same service interval requirements.
7)
Removal of the TEAC Label or Serial number from the product will void this warranty.
TEAC
DISCLAIMS ALL IMPLIED WARRANTIES ON THE PRODUCT, INCLUDING WITHOUT LIMITATION
WARRANTIES OF MERCHANTABILITY, PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE.
TEAC
WILL NOT BE LIABLE FOR ANY ERROR, OMISSION, DEFECT, DEFICIENCY, OR NON-CONFORMITY IN ANY
SOFTWARE. AS A RESULT, THE PRODUCT IS SOLD “AS IS”, AND THE PURCHASER ASSUMES THE ENTIRE RISK
AS TO ITS QUALITY AND PERFORMANCE, AND IT IS UP TO THE PURCHASER TO DETERMINE SUITABILITY FOR
THE INTENDED PURPOSE. THE MAXIMUM LIABILITY IN ANY CASE SHALL BE LIMITED TO THE LESSOR OF
THE PURCHASE PRICE PAID FOR THE PRODUCT OR THE
TEAC
PUBLISHED RETAIL PRICE AT THE TIME OF
PURCHASE.
TEAC
RESERVES THE RIGHT, AT
TEAC’s
SOLE DISCRETION, TO REFUSE TO PROVIDE, OR TO DISCONTINUE
PROVIDING TECHNICAL SUPPORT IF
TEAC
KNOWS, OR HAS REASON TO BELIEVE THAT SUCH TECHNICAL
SUPPORT WILL AID CIRCUMVENTING ENCRYPTION OR COPY PROTECTION TECHNOLOGY, OR OTHERWISE
ATTEMPTING TO VIOLATE THE LAWS OF ANY COUNTRY.
TEAC
SHALL NOT BE LIABLE FOR CIRCUMVENTING,
OR ATTEMPTING TO CIRCUMVENT SUCH TECHNOLOGY USING
TEAC
PRODUCTS, OR OTHERWISE AIDING
ANY ATTEMPT TO VIOLATE THE LAWS OF ANY COUNTRY.
TEAC
SHALL NOT BE HELD LIABLE FOR THE INTEGRITY AND/OR LONGEVITY OF ANY TEXT, GRAPHICS, BAR