7. Administration (Via the LCD/Touchpad)
7.1 Setup Menu
The System Setup Menu is located near the bottom of the Main Menu screen.
7.2 Job Options
These functions set up options used during the duplication process. Use the up arrow /\
key to scroll up or press the down arrow key \/ to scroll down. Press the
YES
or
NO
key to
select the desired values.
When the displayed selections are correct press the
ENTER
key to save or press the
STOP
key to exit and leave the options unchanged.
7.2.1 Burn Discs
If set to ‘No’ the System is in simulate mode and will not actually write a disc. It goes
through all the motions and is a good test to see if the autoloader is in operating
condition.
NOTE:
When this is set to ‘No’ a warning message will be displayed when you attempt to create
a job and the BURN/SIM field of the LCD will show SIM (for Simulate Burn) while copying
discs.
7.2.2 Compare Master
If set to ‘Yes’ the master disc will be read a second time and the new read compared with
the first. If the data are not the same a BAD MASTER error will be displayed.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD. This is not a limitation of
the System, but a limitation of the CD format low-level error correction systems.
7.2.3 Compare Copy
If set to ‘Yes’ every disc recorded (burned) will be re-read and compared to the master
data (the disc will be verified for correct data). If the data are not the same or there is a
read error the disc will be rejected.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD. This is not a limitation of
the System , but a limitation of the CD format low-level error correction systems.
7.2.4 Audit Copy
If set to ‘Yes’ every disc recorded will be audited to confirm that the entire disc was
actually recorded. This involves reading the first and last part of the discs to ensure that
they are readable. Other parts of the disc are not read. This function is useful for
checking that discs were actually burned (all the way to the end) by the recorder, and
adds only a few seconds to the cycle time.
