Setting the Disc Margin to 0.5 results in the outer
mask ‘closing in’ around the design (see right).
2.6.2 Hub Size
Setting the Hub Size to a smaller value will reduce the
size of the center mask on the design (see right).
2.7 Saving as a Template
When a supported printer is used, templates can be used instead of '.PRN' Print Image
files when starting a job involving a print file. The advantage to this is that the print file is
generated based on the printer type TrueNet finds on the device; if you change the type
of printer on your Network Device, you will not necessarily need to change the artwork
file.
To save a design as a template, use
File | Save As
(or the corresponding ‘Save As’ button)
and
then choose a location and name for the file. TrueNet will automatically save the file
with a '.RPT'
extension. When selecting a print source file for a job within TrueNet, either
a '.PRN' or '.RPT' file is valid. Another advantage to using a template file is that dynamic
text is possible. Please see the 'Dynamic Text Entry' and API sections for further details
on this.
2.8 Creating a Design from Scratch
Basic blocks of color can be added to the design using the Graphics Toolbar functions.
These can be used to create a design by themselves or by using these to create
backgrounds for text and text boxes within your design.
An example can be seen below:
