409-35001
Rev C
67
of 92
Board Thickness Tolerance
For optimal performance, PCB thickness variation should be minimal. If too large, the performance
would be inconsistent. If excessive PCB thickness variation is a potential, use the Measure Board
Thickness option in the press data editor to verify the thickness of the PCB.
Figure 70
Tooling and Fixture Match Up
It is not recommended to use seating tools and fixtures interchangeably. If the customer has multiple
copies of the same tool or fixture, it is recommended to dedicate the tooling combination to a specific
machine and tune the profile on that machine to match the tooling.
An alternative option would be to apply a unique ID to each tool and fixture and then use the tool ID
and Fixture ID fields in the software to verify that the correct tooling is used. They would have to create
programs for every potential combination of tooling. Naturally, this could become complicated if there
are numerous copies of the same tooling.
If neither of these options work, the alternative is to adjust the profile to be more tolerant of the
variation which will make it less likely to detect bent pins.
Figure 71
Содержание CBP-5T Mk II
Страница 34: ...409 35001 Rev C 34 of 92 Figure 35 Figure 36...
Страница 71: ...409 35001 Rev C 71 of 92 Figure 77...
Страница 72: ...409 35001 Rev C 72 of 92 Figure 78 Figure 79...
Страница 75: ...409 35001 Rev C 75 of 92 Figure 82 Figure 83...
