Doc. No: 412-121033
BTT-02 card printer manual
Issue: 1
Date: Jul 2014
Author: Ian Ridgeway
Issue date:
Aug 2014
Page: 6 of 18
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
1.2.4. Mounting of feed-in tray
The feed tray is used to load the product into the printer.
The two pins on the feed-in tray mounting plate are used to roughly position the tray
to the print head. In order to firmly fix the tray use a Phillips’ head screw. The
standard feed-in tray is made for cards measuring 36-60mm (optional 90mm) wide.
Regularly cleaning (using alcohol) the tray surface and guide bar, to remove
adhesive residue, will ensure optimal card feed.
