Doc. No: 412-121033
BTT-02 card printer manual
Issue: 1
Date: Jul 2014
Author: Ian Ridgeway
Issue date:
Aug 2014
Page: 15 of 18
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
a) Switch the printer off (POWER “O“)
b) Remove the ribbon,
c) Pull out both plugs on the print head
(3)
d) Partly undo two screws
(5)
e) Using an Allen key losen the four fastening screws and remove the defective print
head.
f) Mount the new print head
(6)
and refasten the four screws
(4)
g) Insert the justification plate from the front
(1)
, between the first pair of transport
rollers
(2)
, until it sits firmly in place
h) Press the print head gently onto the justification plate and fix the two screws
(5)
of
the print head fixing unit
(7)
i) Remove the justification plate, switch the printer on (POWER "I") and run a print
test. If the print is uneven then repeat steps f) to h) and, if necessary, slightly
alter the angle of the print head
(8)
.
3.2. Cleaning the print head and transport rollers
In order to clean the print head, lift it and fix it into the elevated position (white fixing
pin). Remove the colour ribbon and clean the print head with a fluff-free, soft fabric
dipped in alcohol. After cleaning, replace the print head into position and lock. If
both transport rollers are exceptionally dirty, they can be cleaned using a cleaning
card (BZZ). This cleaning process is carried out by first switching the printer off, then
fixing the print head into the elevated position, then moving the cleaning card
backward and forward several times. After the cleaning process is completed
replace and lock the print head into position.
