Doc. No: 412-121033
BTT-02 card printer manual
Issue: 1
Date: Jul 2014
Author: Ian Ridgeway
Issue date:
Aug 2014
Page: 4 of 18
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
1.2. Installation
This product should be installed by TE Connectivity approved personnel who will
ensure it meets your requirements. (Note: - please ensure all packaging is retained,
as the printer should be returned in its original packaging should the need arise.)
During the installation process, the engineer will explain all relevant aspects of the
operation of your system. It is important to us to know that we have undertaken this
installation accurately and comprehensively and that you are comfortable and
confident with the information that has been given. If there are any aspects that you
feel have not been covered in sufficient detail or about which you have any concerns,
please do not hesitate to raise them
1.2.1. Preparation of installation site
The installation site should be flat and stable. Ensure there is ample space for:
cable
connection
air circulation through the vents.
Fluids must not come in contact with the printer casing or its contents.
