Doc. No: 412-121033
BTT-02 card printer manual
Issue: 1
Date: Jul 2014
Author: Ian Ridgeway
Issue date:
Aug 2014
Page: 10 of 18
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Only colour ribbons recommended by the manufacturer will produce optimal
results
The ribbon is the loaded as per the intructions below.
1.
Insert the ribbon onto ribbon spool
(1)
ensuring the ribbon feeds from the
back of the roller as per the diagram below.
2.
Feed the ribbon around the roller
(3)
and under the print head. Using a card
to help position and guide the ribbon can make this easier.
3.
Take the ribbon to ribbon spool
(2).
Insert the blank ribbon core onto spool
(2)
then fix the end of the ribbon, with adhesive tape, to the ribbon core on
spool
(2)
4.
Turn the spool clockwise around 2 complete turns to tighten.
The print head can then be closed down and locked into place by the print head
lever.
