Doc. No: 412-121033
BTT-02 card printer manual
Issue: 1
Date: Jul 2014
Author: Ian Ridgeway
Issue date:
Aug 2014
Page: 11 of 18
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
5.
Thereafter, place the cleaning reel (red) into the correct position. Use Phillips’
head screws to attach the feed-in tray. The standard feed-in tray is made for
cards measuring 36-60mm (optional 90mm) wide.
1.2.7. Adjusting the feed-in tray (checking the printout)
Cards should be centrally feed onto the transport roller. Use the two Worm screws
on the mounting plate of the fed-in tray to adjust and align the print image with the
card.
Fine tuning is conducted as part of the delivery
(see enclosed sample
cards).
If further image alignment problems occur, conduct a test print using a print
file which contains an image with a line parallel to the card edge. If necessary, adjust
further.
