TDT C-Series, Руководство пользователя

Страница: 96 / 136

C-M-G Series
Manual
© TDT GmbH Chapter 5: Network Configuration Seite 96 von 136
Command Description
Accept unless MAC address
is in the following deny list WLAN will be denied for MAC addresses in this list
5.20 WWAN
For routers which are equipped with a LTE modem (Cxxxxl), a connection establishment using WWAN is
required.
The available WWAN modules/interfaces are displayed on the main page.
Use the interfaces page to configure SIM1 and SIM2 parameters.
Command Description
Status Displays the status for the corresponding SIM card.
Network Technology Defines which connection technologies should be used. Selects
technology according to availability
2G use connections type 2G (GPRS/EDGE)
3G use connections type 3G (UMTS/WCDMA to
HSPA+)
4G use connections type 4G (LTE)
GSM Network Registration Specify whether a voice channel registration should be performed
or not.
Note

May be useful if MultiSIM-Cards are employed,
because the router reject calls during »parallel
ringing«
PIN If PIN is not disabled for the SIM card, enter it here.
After successful authentication PIN can be disabled or changed
here.
Should it be required to enter the PUK, it also can be entered
here.
Public Land Mobile Network Sets a preferred mobile operator for the radio connection.
This might be useful or necessary, if several providers are
available, to suppress a fluttering between two or more providers.
The »Public Land Mobile Network Code« is a combination of the
three-digit Mobile Country Code (MCC) and the two-/three-digit
Mobile Network Code (MNC) and is specified without separators
or spaces. (see
14.2 Important Informationen )
APN The Access Point Name of the mobile telephone system provider
Authentication If your APN needs to authenticate, chose the authentication type
here
Auth. Username The user name assigned by your provider
Auth. Password
The password for the account