TDT C-Series Скачать руководство пользователя страница 75

Страница: 75 / 136

C-M-G

Series

Manual

Chapter 5: Network Configuration

Seite 75 von 136

5.12.1.3 Parameters for interface pppX when used in Static Connections

Important!



Don´t

use the following parameters in combination with the Connection Manager.



This options only works using ISDN connections.

Command

Description

Add a defaultroute

After a ppp connection is established successfully, a defaultroute
via this interface will be set.

PPP interface routing metric

Specify the routing metric for this interface.

Update DNS Server directly

Perform a DNS Server Update once the interface comes into
service.

Update DynDNS entry

Perform a Dynamic DNS Update once the interface comes into
service.

5.12.2 PPP Accounts

In the PPP Acounts menu PAP (Password Authentication Protocol) or CHAP (Challenge Handshake
Authentication Protocol) users can be created and administered.

5.12.2.1 Create new PPP CHAP/PAP account

Kommando

Beschreibung

Username

Any

The username can be empty or consist of
any ASCII characters.

String

The defined username must be used.

Password

None

There will not be any password control in
login.

From File

The password will be compared with
those stored in the password file.

Set To

The password will be set to a defined
value. Please observe lower and upper
case letters.

Server

Any

There is no control of the incoming server

String

The login can only be made on the
defined server.

Valid Addresses

Allow any

No address control will be carried out
during login.

Allow none

The account is blocked.

Allow listed

Only defined addresses are allowed to log
on.

Содержание C-Series









































































































































Результаты поиска

Содержание C-Series

Отзывы:

Похожие инструкции для C-Series

Бренды по названию

Популярные бренды

TDT C-Series, Руководство пользователя

Результаты поиска

Содержание C-Series

Отзывы:

Похожие инструкции для C-Series

Бренды по названию

Популярные бренды