TDK-Lambda PAQ100S48-1R2, Инструкция по эксплуатации

Страница: 13 / 36

PAQ
-S48
PAQ
B-237
・All specifications are subject to change without notice.
PAQ-S48 Instruction Manual
1. Terminal Explanation
Be sure to take note of precautions and warnings indicated in
this manual when using this product. Improper usage may lead
to electric shock or fire. Be sure to read this instruction manual
thoroughly before using this product.
Caution
● There are high voltage and high temperature components
within this product. Refrain from disassembling this product or
touching its internal components as this may lead to electric
shock or burned.
● When the unit is operating, keep your hands and face away
from the unit. You may get injured by accident.
● Confirm connections to input/output terminals and signal ter-
minals are correct as indicated in the instruction manual.
● Attach a fast blow type external fuse to each module to en-
sure safety operation and compliance to each safety standard
approval.
● This power module is designed for professional installation
within the end user equipment.
● Use isolated voltage by reinforced or double insulation as in-
put power source.
● Do not inject abnormal voltage to output terminal and signal
terminal from the outside.
The injection of reverse voltage or over voltage exceeding
nominal output voltage to output terminals might cause dam-
age to internal output capacitor (Functional Polymerized Ca-
pacitor)
● The application circuits and their parameter are for reference
only. Be sure to verify effectiveness of application circuits
and their parameters before finalizing circuit design.
● The information in this document is subject to change with-
out prior notice. For actual design-in, please refer to the lat-
est publications of data sheet, etc., for the most up-to date
specifications of the unit.
● No part of this document may be copied or reproduced in any
for, or by any mean without prior written consent of Densei-
Lambda.
Note：CE Marking
CE Marking, when applied to a product covered by instruction
manual, indicates compliance with the low voltage directive
which complies with EN60950
Before Using This Power Module
[Input terminal]
-Vin: -Input Termminal
CNT: ON/OFF Control Terminal
+Vin: +Input Terminal [Output terminal]
-V: -Output Terminal
-S: -Remote Sensing Terminal
TRM: Output Voltage Trimming Terminal
+V: +Remote Sensing Terminal
+S: +Output Terminal
＋V
＋S
TRM
−S
−V
＋Vin
−Vin
CNT
Bottom View
Input and Outoput Terminal Configurations (Bottom View)
● PAQ100S48-*/B Instruction Manual B-246Page
● PAQ65D Instruction Manual B-250Page