TDK-Lambda LZS-A500-3, Руководство по установке

Страница: 19 / 27

LZS-A500-3 Power Supply
Protection Features
Table 9
Output Voltage Range V 18-29.4V
Nominal Factory Set Point V 24V
Overvoltage Protection (adjustable) V 20-34V (Factory set to 31.0V)
Overcurrent Protection - Factory set to 110% min. and 130% max.
Thermal Protection - Self-resetting thermostat.*
Fusing - Internal
Isolation Voltages - 4242 VDC, Input to Output
2121 VDC, Input to Chassis Ground
500 VDC, Output to Chassis Ground
Regulatory Agency Compliance - UL 62368-1, CSA C22.2 No. 62368-1
UL508, CSA C22.2 No. 107.1
EN62368-1
IEC62368-1
IEC61000 2nd Edition, Semi F47
Leakage current (AC line to μ A Less than 500 μ A @ 265 VAC, 60 Hz
chassis ground)
Mechanical Features
Units
Table 10
Storage Temperature (non-operating) °C -40°C - +85°C
Weight lbs 6.5 lb net
Size inches 4.75” x 4.25” x 10.25”
Finish - Textured gray - painted
Mounting - One mounting surface (mounting position not restricted)
Maximum allowable penetration into power supply is
1/4”. Requires No. M4 (metric) hardware - supplied
with unit.)
Input and Output Connections
Table 11
Input Heavy duty terminal block
Chassis Ground Tapped hole and screw provided in chassis.
DC Output Heavy-duty bus bars with 1/4” clearance holes for load connections.
(Connection hardware supplied with unit.)
Local/Remote voltage sensing, Four-position lugless connector (TB201), see Fig. 1.
Remote on/off, Parallel operation. (Accepts up to #14 AWG size stripped wire).
Auxiliary Control and Alarm Signals Connections for remote and local sensing, remote on/off, parallel operation current
sharing, input power good signal, OV alarm, UV alarm, inverter good
signal and chassis are available via chassis mounted, 15-pin, female,
sub-miniature “D” connector (see Fig. 1).
Other Features
Table 12
Warranty 5 years
Cooling Variable speed, Ball Bearing Fan
Fungus Inert All LZS power supplies are inherently fungus inert.
Humidity 10%-90% Non-condensing
Altitude 0-10,000 Ft (Operating); 40,000 Ft (Non-Operating)
* See “Overtemperature and Overvoltage Shutdown” on page 7
1-800-LAMBDA-4 Revision N : January 2022
Page. 6