TDK-Lambda Genesys Series, Руководство пользователя

Страница: 22 / 42

OUTPUT:PON 1
Notes:
This command is in addition to the SCPI compliance requirements.
2.5.5 REPORT POWER SUPPLY POWER-UP MODE COMMAND
Report the Power Supply Auto-Restart or Safe-Start operation upon power up mode. The inter-
face will return an ON if the supply is Auto-restart operation or an OFF if the supply is in Safe-
Start operation
Syntax:
OUTPut:PON?
Example:
OUTPUT:PON?
Notes:
This command is in addition to the SCPI compliance requirements.
2.5.6 READ SCPI VERSION COMMAND
Read the SCPI Compliance year that this interface adheres to.
Syntax:
SYSTem:VERSion?
Example:
SYSTEM:VERSION?
2.6 COMMON COMMANDS
2.6.1 CLEAR STATUS COMMAND
Clears all event registers and stored error messages.
Relays the command to the Power Supply
Syntax:
*CLS
Example:
*CLS
2.6.2 SET SERVICE REQUEST ENABLE COMMAND
Set the Service Request Enable Register.
Syntax:
*SRE<SP><value>
Example:
*SRE 140
Notes:
<value> is a decimal number representing the sum of all the enabled bits. The range of
<value> is 0 to 255.