TCS FBO1100-0400, Информация о продукте

Страница: 6 / 24

6 04/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88 Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129

Mail: hotline@tcsag.de PI_FBO1100_uk 1A
Indication and operating elements
Term Function
Reset push button

for reset, restart the software

to reload factory settings
button Reload factory
setting WE

to reload factory settings
Status indication
TCS:BUS
(red LED) 
OFF : stand-by

ON : during a voice connection between TCS:BUS and PBS / PSTN

both LEDs ON : when reloading the factory setting

blinks slowly : busy (voice connection or alarming, announcement)

blinks fast : a-wire is not connected or supplied

flashes OFF : device is activated for programming with configuration software
configo™

flashes ON : door call, internal call or sensor signal received

flashes ON, once, long break : a-, P-wire are exchanged or short-circuited

flashes ON, twice, long break : error duplication of the block number and
different device versions

flashes ON, three times, long break : error duplication of the block number
in case of identic devices
Status indication
PBX / PSTN connec-
tion (yellow LED)

OFF : error P-wire is not connected or not supplied

ON, briefly : as long as a call signal comes in at the TK-Interface

ON : after a door call, during connection establishment and voice connection

both LEDs ON : when reloading to factory settings

blinks slowly : programming mode active

blinks fast : once, connection to the PBX / PSTN cannot be realised, occu-
pied

flashes OFF : after a door call with deviated connection establishment, until
the end of the delay time

flashes ON : connection to the sensor without speaking

flashes ON, once, long break : variant with 16 dialing registers

flashes ON, twice, long break : variant with 4 dialing registers

flashes ON, three times, long break : variant with 32 or 64 dialing registers
Intended use

The FBO1100 is an interface for the connection from the TCS:BUS to a telephone net in
order to establish a voice connection between a TCS:BUS client (front-door or indoor
stations) and a client within the telephone net.

The connection is realised via an analogue port.

Up to 64 FBO1100 can be connected to a TCS:BUS.