04/2013
21
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_FBO1100_uk 1A
Reload to factory settings
All programmed parameter are deleted within one process.
This is necessary, e.g. in case the identification number for the programming mode is lost.
This number can be reset only to
0000
by reloading the factory setting.
Press the button
Load factory settings
and keep it pressed.
At the same time, shortly press the
Reset
button.
Release the button
Load factory setting
. The factory settings are reloaded. The process
takes around 2 s. During this time the actuator output is active.
Operating
The call acceptance is realised by pressing the
button 7
of the (mobile) telephone (can
be changed with the configuration
software configo™, as of version 1.7.)