DR
AF
T
WPS
is a method of easily connecting a WiFi device to a Wi-Fi Access Point or Router. Most modern WiFi
routers have a
WPS
push button on them that, when pressed, can allow a device to automatically and
securely connect to it. Sometimes this button is labeled with the icon
.
Use the following process:
1. Make sure that the CS-105 and the WiFi access point are not too far from each other.
2. Long press the push button to enter Push Button Configuration Mode.
3. Press the WPS button on the WiFi router.
4. Press the CS-105 push button 4 times.
5. Wait. The connection procedure can take up to two minutes.
7.3.5 Remove All Custom WiFi Connection Profiles Mode Entry
This action is selected by a
long press, then 5x short presses.
A
WiFi Connection Profile
is a small bit of information that the CS-105 stores and remembers in order to
know how to connect to a WiFi router. It is sometimes useful for the CS-105 to know how to connect to
multiple WiFi routers if, for example, it is used in multiple locations and with different WiFi networks. The
CS-105 can store up to 7 custom profiles.
When all 7 profiles are full, it is necessary to remove existing custom
WiFi Connection Profiles
in order to
be able to add new ones.
When this action is selected, the CS-105 will reboot, remove all stored WiFi information, and add its factory
default WiFi Connection Profile (Name: LAYOUTWIFI, password: 123456789).
7.3.6 Exit Push Button Configuration Mode
This action is selected by a
long press, then 6x short presses.
If you press the button one too many times, all four LEDs will be solid on. After 30 seconds, if no additional
buttons are pressed,
Push Button Configuration Mode
will be exited and normal operations will resume.
© 2022 Train Control Systems
Page 31 of 49