Factory Alignment Specification
Test Alignment Specification for MT62S-LA.doc (Page 10 of 16)
Appendix
n
How to download main software
1. Connect PC to connector
P16
with USB serial device.
2. Power on the chassis.
3. Start “MTKTOOL.exe”, and set the parameters as below picture:
4. Press “Browse” button to select the corresponding bin file to upload.
5. Press “Upgrade” button and select “
Nor
” as flash type to start downloading the SW and wait
the guage displayed “100%” that means the SW has been successfully downloaded.
6. Once the SW is downloaded, switch-off/on the chassis board and wait a few seconds for
system NVM update.
Note: Software update can also be achieved by USB disk:
A. Copy the code file to the root directory of USB disk. File name should be
“
upgrade.pkg”
, and USB disk can not be in NTFS format.
B. Power on the TV, and plug in USB disk.
C. Follow the guide shown on screen to start update.
D. Need to reset TV after update.