tbs electronics TBS 500, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 56

LED: flashes 7 x
Cause: Operator has not yet performed any learning
cycles (this is simply being pointed out and
does not constitute an error).
Remedy: Initiate a learning cycle by pressing an
external push-button, the hand transmitter
button or circuit board button
T (with opened
light cover).
LED: flashes 8 x
Cause: Operator needs to perform an opening
reference cycle.
Remedy: Initiate an opening reference cycle by
pressing an external push-button, the
hand transmitter button or the T-button
(with opened light cover). This is the normal
state following a power failure, if no door
data is present or has been deleted and/or
the last door position is not sufficiently well
known.
9 DISMANTLING
Have the garage door operator dismantled and disposed
of by a qualified specialist.
10 OPTIONAL ACCESSORIES
(NOT INCLUDED IN THE SCOPE OF SUPPLY)
Loading of the operator by the accessories: max. 100 mA.
• External radio receiver
• External impulse button, e.g. key switch
• One-way photocell
• Warning lamp / signal light
• Wicket door contact
• Emergency power accumulator pack
11 TERMS AND CONDITIONS OF THE WARRANTY
Warranty period
In addition to the statutory warranty provided by the
dealer in the sales contract, we grant the following
warranty of parts from the date of purchase:
a) 5 years on operator mechanics, motor and motor
control system
b) 2 years on radio equipment, accessories and special
systems.
There is no warranty on consumables (e.g. fuses, batte-
ries, light bulbs). Claims made under the warranty do
not extend the warranty period. For replacement parts
and repairs the warranty period is 6 (six) months or at
least the remainder of the warranty period.
Prerequisites
A claim under this warranty is only valid for the country
in which the equipment was bought. The product must
have been purchased through our authorised distribu-
tion channels. The warranty only covers damage to the
contract object itself. Reimbursement of expenditure for
dismantling and installation, testing of corresponding
parts, as well as demands for lost profits and compen-
sation for damages, are excluded from the warranty. The
receipt of purchase substantiates your right to claim
under the warranty.
Performance
For the duration of the warranty we shall eliminate any
product defects that are proven to be attributable to a
material or manufacturing fault. We pledge to replace
free of charge and at our discretion the defective goods
with non-defective goods, to carry out repairs or to
grant a price reduction.
Excluded is damage due to:
- improper installation and connection
- improper putting into service and operation
- external influences, such as fire, water, abnormal
weather conditions
- mechanical damage due to accidents, dropping,
impact
- negligent or deliberate destruction
- normal wear or deficient maintenance
- repair by non-qualified persons
- use of non-original parts
- removing or defacing the product/production number
Replaced parts become our property.
12 TECHNICAL DATA
Power supply: 230/240 V, 50/60 Hz
Stand-by approx. 5 W
Protection category: For dry rooms only
Spare light bulb: 24 V / 10 W B(a) 15s
Motor: DC motor with Hall sensor
Transformer: with thermal overload protection
Connection: Connection technique without
screws for external equipment
with safe low voltage of 24 V DC,
e.g. internal and external push-
buttons for impulse control.
Remote control: Operation with internal or
external radio receiver
Automatic cut-out: Is automatically learned sepa-
rately for both operational
directions. Self-learning, non-
wearing because no mechanical
switches are involved.
End-of-travel
cut-out / Force limit: Re-adjusting automatic cut-out
for every door cycle.
Boom: Extremely flat (no more than
30mm) with integral door sec-
urity kit and maintenance-free,
patented toothed belt with
automatic belt tensioning.
➤
42 02.2006 TR10B005 RE
E N G L I S H